PalmPad's Teensy ↔ Web Serial (Fail-Fast) Test

Use the latest Chrome version and make sure no Serial Monitors are open.

Instructions

  1. Flash teensy_fail_fast.ino to your Teensy.
  2. Set USB Type to Serial or Serial + Keyboard + Mouse + Joystick.
  3. If flashed properly, the LED on the Teensy will blink.
  4. Click the Connect button below and select your Teensy device in the popup.
  5. When connected, you’ll see a green “Connected” badge and an updating timestamp once per second.
  6. If you are able to connect, then you'll have no issues flashing and configuring your PalmPad!!!
Disconnected
Device timestamp (ms since boot): —